User`s guide

26
General Radio Features
Viewing a Scan List
1 Press and hold the SCAN softkey until the Scan indicator blinks
and a beep is heard.
The radio suspends scanning while a scan list is being
reviewed.
2 Press the  button to scroll to the VIEW softkey.
3 Press the button below VIEW.
4 Press the  button to scroll to the SCAN softkey.
5 Press the button below SCAN. The radio suspends
scanning while a scan list is being reviewed.
6 Press the  or button to scroll through the preprogrammed
scan list.
7 Those modes that are in the scan list are indicated by N PRI,
PRI or blinking PRI indicator (indicating the mode’s assigned
priority as previously described).
8 Press RCL softkey to review only modes that are already in the
scan list.
Press the HOME button momentarily to exit the scan list and
resume scanning.