User`s guide

Selecting Secure Mode
Selecting an Encryption Key
Selecting a Key Index
Erasing an Encryption Key
DISPLAY AND LIGHT INDICATORS
Press and release the SEC softkey. The D indicator
lights up.
1 Press and hold the SEC softkey until a tone sounds.
2 Use the navigation keys to scroll to KEY SEL.
3 Press Sel to enter the Key Selection Menu.
4 Use the navigation keys to select desired key.
5 Press Sel to select key.
6 Press Home or the PTT button to quit.
1 Press and hold the SEC softkey until a tone sounds..
2 Use the navigation keys to scroll to INDX SEL.
3 Press Sel to enter the Index Selection Menu.
4 Use the navigation keys to select desired index.
5 Press Sel to select index.
6 Press Home or the PTT button to quit.
1 Press and hold the SEC softkey until a tone sounds.
2 Use the navigation keys to scroll to ERASE KY.
3 Press Sel to enter the Key Erase Menu.
4 Use the navigation keys to select desired index.
5 Press Sel to select index.
6 Press Home or the PTT button to quit.
Display/Light Meaning
BUSY light on Displayed conventional mode has
activity on it, or selected trunked
system is currently busy. Wait for
callback.
XMIT light on Indicates you are transmitting.
Dir indicator lit Radio is in direct (mobile-to-
mobile) operation.
PRI, NPRI
indicators lit
Display shows a mode in the scan
list with the indicated priority level.
P displayed Telephone dialing pause. Press
Sel softkey to continue the dialing.
NO ACKNOWLEDGE
displayed
Unit being called with the
Enhanced Private Conversation or
Call Alert Page feature is not in
service, or emergency alarm or
status/message transmission is
not acknowledged by dispatcher.
PHONE BUSY
displayed
Trunked phone interconnect is
busy.
NO ANSWER
displayed
Unit being called with Enhanced
Private Conversation or Call Alert
Page does not respond, but is
operational.
EMERGENCY
displayed
Radio is in emergency alarm or call
state.
NO EMERGENCY
displayed
A mode incapable of emergency
transmission has been selected.
OUT OF RANGE
displayed
Radio is out of range of the
trunking system.