Installation guide

Hardware Installation
15
2.9 LED Indicators
Both Integrated Antenna and External Antenna models have LED activity indicators on the front of the
case. With the External Antenna models mounted above a ceiling, LEDs are at the center of an oval
badge on the ceiling; a light pipe enables viewing the back LEDs through the ceiling tile.
The LEDs provide a status display indicating error conditions, transmission, and network activity for
the 5 GHz 802.11a/n (amber) radio or the 2.4 GHz 802.11b/g/n (green) radio..
Task 5 GHz Activity LED (Amber) 2.4 GHz Activity LED (Green)
System Booting Solid On (During start up only) Solid On (During start up only)
Radio Shutdown
Administratively
or
LEDs Disabled
Off Off
Radio Not Configured
or
Country-code not set
or
WLAN not mapped to
radio
Blink (On 2 seconds, Off 2 seconds) Blink (On 2 seconds, Off 2 seconds)
Locate AP Mode Off Blinking