Installation guide

AP 7161 Access Point Installation Guide 29
PoE Unit Specifications
PoE Interface Connections
Parameter Description
Input voltage 100-240 VAC (50-60 Hz)
Input current 1 ampere (maximum)
Maximum available output power 30 Watts
Nominal output voltage 54 to 57 VDC
Operating voltage 48 VDC (compatible with PoE .3af/.3at Draft)
Operating temperature -40 to -55 degrees C / -40 to 131 degrees F for 30 Watts
-40 to -65 degrees C / -40 to 149 degrees F for 15.4 Watts
Storage temperature -40 to 85 degrees C / -40 to -185 degrees F
Port Connector
Input (Data In) Ethernet 10/100/1000Base T RJ45 female socket
Output (DATA PWR OUT) Ethernet 10/100/1000Base T, +55 VDC RJ45 female socket
with DC voltage on wire pairs 1-2, 3-6, 4-5 and 7-8.
Power cable Pre-installed 5m power cable with main plug.