Installation guide

12 AP 7161 Access Point
1.7 Package Contents
Carefully remove all protective packing material from around the AP 7161 Access Point and save the container for
later storage and shipping. Refer to
AP 7161 Hardware on page 8 when verifying that all AP 7161 hardware has
been received.
Record the serial numbers on the shipping cartons and AP 7161 Access Points for warranty claims
and reference during software download procedures.
When opening the shipping cartons, inspect the equipment for damage. If you find any damaged equipment or any
equipment is missing, contact Motorola Solutions Support immediately.
Each AP 7161 model number (see
AP 7161 Hardware on page 8) includes the following parts:
AP 7161 Access Point
Weatherproof RJ45 plug kit
AP 7161 Access Point Installation Guide (this document)
The following items are not included with the AP 7161 Access Point models but can be ordered from Motorola
Solutions:
Antennas
Mounting brackets/kits
PoE power supply and accessories
RFS controllers (if required)
The following items are not provided by Motorola Solutions and can be sourced from local hardware suppliers,
partners, or distributors:
Lightning protection unit
Cat5E cable to connect power source
Band clamps, lag bolts, or U-bolts
Grounding wire
Self-healing weatherproofing tape
When opening the shipping cartons, inspect the equipment for damaged or missing parts (see
AP 7161 Hardware
on page 8
). If you find any damaged or missing equipment, contact your distributor, partner, or Motorola Solutions
Support immediately.
For items that are not provided by Motorola Solutions, contact your local hardware suppliers.
NOTE Record the serial numbers on the shipping cartons and AP 7161 Access Points for
warranty claims and reference during software download procedures.