Specifications

System Configuration

4-5

4. Use the Reset Keys field to zeroise the key value

(if necessary).

5. Refer to the Self Test field to run self tests and view self test logs.

6. Use the Restart field to restart the AP (if necessary).

CAUTION Restoring the access point’s configuration back to default settings

changes the administrative password back to “motorola.” If restoring

the configuration back to default settings, be sure you change the

administrative password accordingly.

Restore Default

Configuration

Select the Restore Default Configuration button to reset the

AP’s configuration to factory default settings. If selected, a

message displays warning the user the current configuration will

be lost if the default configuration is restored. Before using this

feature, Motorola Solutions recommends using the Config

Import/Export screen to export the current configuration for

safekeeping, see Importing/Exporting Configurations on page 4-47.

Restore Partial

Default Configuration

Select the Restore Partial Default Configuration button to

restore a default configuration with the exception of the current

LAN, WAN, SNMP settings and IP address used to launch the

browser. If selected, a message displays warning the user all

current configuration settings will be lost with the exception of

WAN and SNMP settings. Before using this feature, Motorola

Solutions recommends using the Config Import/Export screen to

export the current configuration for safekeeping, see Importing/

Exporting Configurations on page 4-47.

Reset Keys to Zero In AP7131N, key zeroisation function zeroises all Cryptographic

Keys and Critical Security Parameters (CSP) by overwriting the

storage area three times with an alternating pattern (i.e, three

different patterns).

Run Self Test Select the Run Self Test button to run self tests. The AP-7131N-

FGR access points run a series of self tests. If one of the self test

fails, the device transitions into an error state where all data output

and cryptographic operations are disabled.

Show Self Test Logs Select the Show Self Test Logs

to view the self test logs.