Specifications

Getting Started
3-15
9. Click Apply to save any changes to the access point Quick Setup screen. Navigating away
from the screen without clicking Apply results in all changes to the screens being lost.
10. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the
settings displayed on the access point Quick Setup screen to the last saved configuration.
3.4.3.1 Configuring Basic WLAN Security Settings
To configure a basic security policy for a WLAN:
1. From the Quick Setup screen, click the Create button to the right of the Security Policy item.
At a minimum, a basic security scheme (in this case WPA2/CCMP) is recommended in a
network environment where sensitive data is transmitted.
2. Ensure the Name of the security policy entered suits the intended configuration or function
of the policy.
Multiple WLANs can share the same security policy, so be careful not to name security
policies after specific WLANs or risk defining a WLAN to single policy. Motorola Solutions
recommends naming the policy after the attributes of the authentication or encryption type
selected.
3. Select the WPA2/CCMP (802.11i) checkbox.
NOTE For information on configuring the other encryption and authentication
options available to the access point, see Configuring Security Options on
page 6-2.