Specifications

Getting Started
3-11
5. Select the Quick Setup screen’s Network Configuration tab to define a minimum set of
WAN or LAN configuration values. The WAN tab displays by default.
Set a minimum set of parameters for using the WAN interface.
a. Select the Enable WAN Interface checkbox to enable a connection between the
access point and a larger network or outside world through the WAN port. Disable this
Sensor only Spectrum Analysis
mode
(no WLAN)
Radio 1 WIPS,
Radio 2 WIPS
2.4 GHz WLAN - no Sensor Radio1 WLAN,
Radio 2 Disabled
5.0 GHz WLAN - no Sensor Radio1 Disabled,
Radio 2 WLAN
Radios Off Radios 1 and 2 Disabled