Specifications

Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
9-10
3. Assign an ESSID and Name to the WLAN that each access point will share when using this
WLAN within their mesh network.
Motorola recommends assigning a unique name to a WLAN supporting a mesh network to
differentiate it from WLANs defined for non mesh support. The name assigned to the WLAN
is what is selected from the Radio Configuration screen for use within the mesh network.
NOTE It is possible to have different ESSID and WLAN assignments within a
single mesh network (one set between the Base Bridge and repeater and
another between the repeater and Client Bridge). However, for ease of
management and to not waste network bandwidth, Motorola
recommends using the same ESSID across the entire mesh network.