Specifications

CLI Reference
8-265
AP7131N>admin(system.fw-update)>update
Description:
Executes the access point firmware update over the WAN or LAN port using SFTP.
Syntax:
admin(system.fw-update)>update sftp
For information on updating access point device firmware using the applet (GUI), see Updating Device Firmware on page 4-51.
update <mode> Defines the sftp mode used to conduct the firmware update. Specifies whether the update
is executed over the access point’s WAN, LAN1 or LAN2 interface .
NOTE The access point must complete the reboot process to successfully update the device firmware,
regardless of whether the reboot is conducted uing the GUI or CLI interfaces.