Specifications

CLI Reference
8-257
AP7131N>admin(system.config)> set
Description:
Sets the import/export parameters.
Syntax:
Example:
admin(system.config)>set server 192.168.22.12
admin(system.config)>set user myadmin
admin(system.config>set passwd georges
admin(system.config)>show
Warning: This will display secure information,
Do you want to continue? (n/y?)y
cfg filename : cfg.txt
cfg filepath :
sftp server ip address : 192.268.0.10
sftp user name :
admin(system.config)>
For configuration file creation and export, only the set radio-config is supported. Therefore, when configuration files for export are created,
a line such as set rf-function X wips / wlan (where X is 1 or 2) is never generated.
For configuration file import, the legacy command
set rf-function X wips / wlan is processed.
There is no CLI menu allowing the user to enter
set rf-function X wips/wlan (where X is 1 or 2).
Instead, the command
set radio-configX (where X is 1,2,3,4,5,6,7, or 8) is created in the configuration files for export.
For information on importing/exporting access point configurations using the applet (GUI), see Importing/Exporting Configurations on page
4-47.
set file <filename> Sets the configuration file name (1 to 39 characters in length).
path <path> Defines the path used for the configuration file upload.
server <ipaddress> Sets the SFTP server IP address.
user <username> Sets the SFTP user name (1 to 39 characters in length).