Specifications

Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
8-162
AP7131N>admin(system)>set
Description:
Sets access point system parameters.
Syntax:
admin(system)>set name phils
admin(system)>set loc engineering
admin(system)>set email [e-mail]
admin(system)>set cc us
admin(system)>set dns-relay-mode enable
For information on configuring System Settings using the applet (GUI), see Configuring System Settings on page 4-2. Refer to Appendix A
for information on the two-character country codes.
set name <name> Sets the access point system name to <name> (1 to 59 characters). The access
point does not allow intermediate space characters between characters within
the system name. For example, “AP7131N sales” must be changed to
“AP7131Nsales” to be a valid system name.
loc <loc> Sets the access point system location to <loc> (0 to 59 characters).
email <email> Sets the access point admin email address to <email> (0 to 59 characters).
cc <code> Sets the access point country code using two letters <code>.
dns-relay-
mode
<mode> Enables/disables dns-relay-mode. By default, dns-relay-mode is enabled.
NOTE This name will appear in the WIPS server when one of the radios is configured as a sensor and the WIPS
functionality connects to the WIPS server. The WIPS module only accepts names with up to 20 characters,
keep that if intending to use this AP as a sensor.