Specifications

Introduction
1-29
Make configuration changes to access point’s individually. Optionally, use the access point
import/export configuration function to download settings to other access points.
For detailed information, see Importing/Exporting Configurations on page 4-47.
1.3.8 MAC Address Assignment
MAC address assignments are as follows:
• LAN (GE1) - The access point MAC address can be found underneath the access point
chassis.
• WAN (GE2) - WAN MAC address + 1.
• LAN2 - A virtual LAN not mapped to the LAN Ethernet port. This address is the lowest of the
two radio MAC addresses.
• Radio1 (802.11b/g/n) - Random address located on the Web UI, CLI and SNMP interfaces.
• Radio2 (802.11a/n) - Random address located on the Web UI, CLI and SNMP interfaces.
The access point’s BSS (virtual AP) MAC addresses are calculated as follows:
• BSS1 - The same as the corresponding base radio’s MAC address.
• BSS2 - Base radio MAC address +1
• BSS3 - Base radio MAC address +2
• BSS4 - Base radio MAC address +3
MU Mobile Unit
Table 1.2 Acronyms
Portal Radio of an AP