Specifications
CLI Reference
8-83
AP7131N>admin(network.wireless.security)>create
Description:
Defines the parameter of access point security policies.
Syntax:
create Defines the parameters of a security policy.
show Displays new or existing security policy
parameters.
set
sec-name
<name> Sets the name of the security policy.
auth <authtype> Sets the authentication type for WLAN <idx> to
<type> (none or eap)
eap server <sidx> <ip> Sets the radius server (1-primary or as 2-
secondary) IP address <ip>.
secret <sidx> <secret> Sets the EAP shared secret <secret> (0-95
characters) for server <sidx> (1-primary or 2-
secondary).
The default password is now “motorola” instead
of “symbol.” Be cognizant of this when importing
a configuration from the 1.1 baseline, as this
shared secret will have to be changed to
motorola (after the import) to avoid MU
authentication failures. This change can only be
made using the access point CLI.
reauth mode <mode> Enables or disables EAP reauthentication.
period <time> Sets the reauthentication period <period> in
seconds (30-9999).
retry <number> Sets the maximum number of reauthentication
retries <retry> (1-99).
accounting mode <mode> Enable or disable Radius accounting.
server <ip> Set external Radius server IP address.
secret <secret> Set external Radius server shared secret
password.
timeout <period> Defines MU timout period in seconds (1-255).