Specifications

Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
8-68
AP7131N>admin(network.wireless.wlan)> show
Description:
Displays the access point’s current WLAN configuration.
Syntax:
Example:
admin(network.wireless.wlan)>show summary
Warning: This will display secure information,
Do you want to continue? (n/y?)y
WLAN1
WLAN Name : Lobby
ESSID : 101
Radio Bands : 2.4 and 5.0 GHz
VLAN : <none>
Security Policy : Default
QoS Policy : Default
Rate Limiting : disabled
admin(network.wireless.wlan)>show wlan 1
Warning: This will display secure information,
Do you want to continue? (n/y?)
ESS Identifier : 101
WLAN Name : Lobby
802.11n (5.0 GHz) Radio : available
802.11n (2.4 GHz) Radio : not available
Client Bridge Mesh Backhaul : available
Hotspot : not available
Maximum MUs : 127
MU Idle Timeout : 30
Security Policy : Default
MU Access Control : Default
disallow MU to MU Communication : disable
Use Secure Beacon : disable
answer Broadcast ESSID : enable
QoS Policy : Default
per-mu rate limiting : disabled
per-mu rate limit (wired-to-wl) : 1000 kb
per-mu rate limit (wl-to-wired) : 1000 kb
For information on displaying WLAN infromation using the applet (GUI), see Click Undo Changes (if necessary) to undo any changes made.
Undo Changes reverts the settings displayed on the screen to the last saved configuration. on page 5-26.
show summary Displays the current configuration for existing WLANs.
wlan <number> Displays the configuration for the requested WLAN (WLAN 1 through 16).