Specifications

Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
8-52
For information on configuring VPN using the applet (GUI), see Configuring VPN Tunnels on page 6-22.
ike opmode <name> <opmode> Sets the Operation Mode of IKE for <name> to
Main or Aggr(essive).
myidtype <name> <idtype> Sets the Local ID type for IKE authentication for
<name> (1 to 13 characters) to <idtype> (IP, FQDN,
or UFQDN).
remidtype <name> <idtype> Sets the Remote ID type for IKE authentication for
<name> (1 to 13 characters) to <idtype> (IP, FQDN,
or UFQDN).
myiddata <name> <idtype> Sets the Local ID data for IKE authentication for
<name> to <idtype>. This value is not required
when the ID type is set to IP.
remiddata <name> <idtype> Sets the Local ID data for IKE authentication for
<name> to <idtype>. This value is not required
when the ID type is set to IP.
authtype <name> <authtype> Sets the IKE Authentication type for <name> to
<authtype> ( PSK ).
authalgo <name> <authalgo> Sets the IKE Authentication Algorithm for <name>
to SHA1.
phrase <name> <phrase> Sets the IKE Authentication passphrase for
<name> to <phrase>.
encalgo <name> <encalgo> Sets the IKE Encryption Algorithm for <name> to
<encalgo> (one of AES128, AES192, or AES256).
lifetime <name> <lifetime> Sets the IKE Key life time in seconds for <name> to
<lifetime>. The IKE key life time is between 300-
86400 seconds.
group <name> <group> Sets the IKE Diffie-Hellman Group for <name> to
G2048.