Specifications

Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
6-26
5. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the
settings displayed on the VPN, Auto Key Settings, IKE Settings and Manual Key Settings
screens to the last saved configuration.
6. Click Logout to securely exit the Access Point applet. A prompt displays confirming the
logout before the applet is closed.
6.7.1 Creating a VPN Tunnel between Two Access Points
This section describes how to define a simple configuration using two access points to create an
IPSec tunnel.
To create a IPSec VPN tunnel between two access points:
1. Ensure the WAN ports are connected via the internet
2. Select Network Configuration -> WAN -> VPN from the access point menu tree.
3. Enter any tunnel name (tunnel names do not need to match).
4. Enter the WAN port IP address of AP #1 in the
Local WAN IP field
5. Enter the LAN IP subnet and mask of AP #2 in the
Remote Subnet and Remote Subnet Mask
fields,
6. Enter the WAN port IP address of AP #2 in the
Remote Gateway field
7. Click
Add to add the tunnel to the list.
8. Select the
Auto (IKE) Key Exchange button.
9. Select
Auto Key Settings .