Specifications

Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
6-14
Use the access point’s Firewall screen to enable or disable the configurable firewall filters. Enable
each filter for maximum security. Disable a filter if the corresponding attack does not seem a threat
in order to reduce processor overhead. Use the WLAN Security screens as required for setting user
authentication and data encryption parameters.
To configure the access point firewall settings:
1. Select Network Configuration -> Firewall
from the access point menu tree.
2. Refer to the
Timeout Configuration field to define a timeout interval to terminate IP address
translations.
NAT Timeout Network Address Translation (NAT) converts an IP address in one
network to a different IP address or set of IP addresses in a
different network. Set a NAT Timeout interval (in minutes) the
access point uses to terminate the IP address translation process
if no translation activity is detected after the specified interval.