Specifications

Network Management
5-77
c. Select the Enable IP Filtering button in the lower portion of the screen.
d. Select the IP Filtering button.
The screen displays with both the Default Incoming Deny and Default Outgoing Deny
checkboxes selected by default. Consequently, if you enable IP filtering but do not apply any
filters that allow IP traffic, then no IP traffic will be forwarded, as the default deny settings
have precedence.
2. Use the Filter name drop menu to select an existing filter.
3. Set the Direction as Incoming or Outgoing as required.
4. Apply an Action of Allow or Deny to permit or restrict the rules of this filter in the direction
selected.
5. Select Add to apply the filter(s) (and their rules and permissions) to the LAN or WLAN.
6. Click Insert to insert the filter(s) to the LAN or WLAN.
7. Click OK add the IP filter to the LAN or WLAN. Navigating away from the screen without
clicking OK results in all changes to the screens being lost.
8. Click Cancel to securely exit the IP Filtering screen without saving your changes.