Specifications

Network Management
5-75
2. Click the Add button to define the attributes of a new IP Filtering policy. The following policy
(or filtering rule) attributes require definition.
NOTE With IP Filtering, users can only define a destination port, not a source
port.
Filter name Create a name for the filter policy unique to its function in order to
differentiate it from others that may have somewhat similar
configurations.
Protocol Specify the protocol used for the filter policy. The options are ALL,
TCP, UDP, ICMP, PIM, GRE, RSVP, IDP, PUP, EGP, IPIP, ESP, AH, IGMP,
IPVG, COMPR_H and RAW_IP. The protocol number can also be
used as the protocol name. This allows the use or protocols that are
not within the drop-down menu.
Port Start Defines the socket number (or port) number representing the
beginning protocol port range either allowed or denied permission
to the target LAN1, LAN2 or WLAN.
Port End Defines the socket number (or port) number representing the
ending protocol port range either allowed or denied permission to
the target LAN1, LAN2 or WLAN.
Src Start Creates a range beginning source IP address to be either allowed
or denied IP packet forwarding. The source address is where the
packet originated. Setting the Src End value the same as the Src
Start allows or denies just this address without defining a range.
Src End Providing this address completes a range of source (data
origination) addresses than can either be allowed or denied access
to the LAN1, LAN2 or WLAN.
Dst Start Creates a range beginning destination IP address to be either
allowed or denied IP packet forwarding. Setting the Dst End value
the same as the Dst Start allows or denies just this address without
defining a range.
Dst End Providing this address completes a range of destination addresses
than can either be allowed or denied access to the LAN1, LAN2 or
WLAN.