Specifications

Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
4-50
4. Refer to the Status field to assess the completion of the import/export operation.
5. Click Apply to save the filename and Server IP information. The Apply button does not
execute the import or export operation, only saves the settings entered.
6. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the
settings displayed on Config Import/Export screen to the last saved configuration.
7. Click Logout to securely exit the access point Motorola Solutions Access Point applet. A
prompt displays confirming the logout before the applet is closed.
Export Configuration Click the Export Configuration button to export the configuration
file from the server with the assigned filename and login
information. If the IP mode is set to DHCP Client, IP address
information is not exported (true for both LAN1, LAN2 and the
WAN port). For LAN1 and LAN2, IP address information is only
exported when the IP mode is set to either static or DHCP Server.
For the WAN port, IP address information is only exported when the
This interface is a DHCP Client checkbox is not selected. For
more information on these settings, see Configuring the LAN
Interface on page 5-1 and Configuring WAN Settings on page 5-16.
The system displays a confirmation window prompting the
administrator to log out of the access point after the operation
completes for the changes to take effect. Click Yes to continue the
operation. Click No to cancel the configuration file export.
NOTE Motorola Solutions recommends importing configuration files using the
CLI. If errors occur during the import process, they display all at once and
are easier to troubleshoot. The access point GUI displays errors one at a
time, and troubleshooting can be a more time consuming process.
NOTE When importing the configuration, a xxxxxbytes loaded status message
indicates the file was downloaded successfully. An Incompatible
Hardware Type Error message indicates the configuration was not applied
due to a hardware compatibility issue between the importing and
exporting devices.
Status After executing an operation (by clicking the Import Configuration/
Export Configuration button), check the Status field for a
progress indicator and messages about the success or errors in
executing the operation.