Specifications

System Configuration
4-35
1. Select System Configuration - > SNMP Access - > SNMP Trap Configuration from the
access point menu tree.
2. Configure the SNMP v3 Trap Configuration field (if SNMP v3 Traps are used) to modify
the following:
CAUTION Ensure IPSec has been properly configured to protect communications
with the external SNMP server. Changes will not be applied
otherwise.
Add Click Add to create a new SNMP v3 Trap Configuration entry.
Delete Select Delete to remove an entry for an SNMP v3 user.
Destination IP Specify a numerical (non DNS name) destination IP address for
receiving the traps sent by the access point SNMP agent.
Port Specify a destination User Datagram Protocol (UDP) port for
receiving traps.