Manualshelf

Specifications

ManualsBrandsMotorola ManualsComputer equipmentAP-7131N-FGR
111112113114115116117118119120
System Configuration
4-27
16. Open the certificate file and copy its contents into the CA Certificates screen by clicking the
Paste from Clipboard button. (Note that this feature will work with Internet Explorer
browser version 6 and above only.)
The certificate is now ready to be loaded into the access point’s flash memory.
17. Click the Import root CA Certificate button from within the CA Certificates screen.
18. Verify the contents of the certificate file display correctly within the CA Certificates screen.
19. Open the certificate file and copy its contents into the Self Certificates screen by clicking
the Paste from Clipboard button. (Note that this feature will work with Internet Explorer
browser version 6 and above only.)
20. Click the Load Certificate button.
21. Verify the contents of the certificate file display correctly within the Self Certificates screen.
The certificate for the onboard Radius authentication of MUs has now been generated and
loaded into the access point’s flash memory.
4.6 Configuring SNMP Settings
Simple Network Management Protocol (SNMP) facilitates the exchange of management information
between network devices. SNMP uses Management Information Bases (MIBs) to manage the device
configuration and monitor Internet devices in potentially remote locations. MIB information accessed
via SNMP is defined by a set of managed objects called object identifiers (OIDs). An object identifier
(OID) is used to uniquely identify each object variable of a MIB. The MIB files are available at
https://portal.motorolasolutions.com/Support/US-EN. In the given portal, the user should serach for
“AP7131N-GR MIBS 4.0.4.0”. For more information refer Appendix C, Customer Support:
CAUTION Ensure the CA Certificate is loaded before the Self Certificate, or risk
an invalid certificate load.
NOTE The above two MIB files have some similar information, but both MIBs
will return the same values.
NOTE MIB objects under ‘apAap’ in Symbol-AP_MIB is applicable only for
AP7131N in Adaptive mode and is not applicable in Standalone mode.