Specifications

System Configuration
4-15
2. Use the access point Access field checkboxes to enable/disable the following on the
access point’s LAN1, LAN2 or WAN interfaces:
3. Refer to the Applet Timeout field to set an HTTPS timeout interval.
Applet HTTPS (port
443)
Select the LAN1, LAN2 and/or WAN checkboxes to enable access
to the access point configuration applet using a Secure Sockets
Layer (SSL) for encrypted HTTP sessions.
CLI SSH2 (port 22) Select the LAN1, LAN2 and/or WAN checkboxes to enable access
to the access point CLI using the SSH (Secure Shell) protocol.
SNMP (port 161) Select the LAN1, LAN2 and/or WAN checkboxes to enable access
to the access point configuration settings from an SNMP-capable
client.
HTTPS Timeout Disables access to the access point if no data activity is detected
over Applet HTTPS (port 443) after the user defined interval. The
default value is 3 minutes.