Installation guide

Basic Configuration
27
5. Select the Quick Setup screen’s Network Configuration tab to define a minimum set of
WAN or LAN configuration values. The WAN tab displays by default.
a. Select the Enable WAN Interface checkbox to enable a connection between the
access point and a larger network or outside world through the WAN port. Disable this
option to effectively isolate the access point’s WAN connection. No connections to a
larger network or the Internet will be possible. MUs cannot communicate beyond the
configured subnets.
5.0 GHz WLAN -
no Sensor
Radio1 Disabled,
Radio 2 WLAN
Radios Off Radios 1 and 2 Disabled
CAUTION Only a qualified installation professional should set the access point’s
radio and power management configuration.
Radio Button AP-7131N-FGR Dual Radio SKU
!