Installation guide

Basic Configuration
23
2. Log in using admin as the default User ID and motorola as the default password. If the
default login is successful, the Change Admin Password screen displays.
3. Change the password to ensure the AP-7131N-FGR is using a secure password different
from the default password. The new password must be at least 8 characters in length.
Enter the current password and a new admin password in fields provided, and click Apply.
Once the admin password has been updated, a warning message displays stating the
access point could be operating illegally unless set to operate in the correct country. Proceed
to “
Configuring “Basic” Device Settings” on page 25 to validate the country setting.
NOTE Though the access point can have its basic settings defined using a
number of different screens, Motorola recommends using the AP-7131
Quick Setup screen to define a minimum required configuration from one
location.