Specifications

System Configuration
4-3
2. Configure the access point System Settings field to assign a system name and location,
set the country of operation and view device version information.
System Name Specify a device name for the access point. Motorola recommends
selecting a name serving as a reminder of the user base the access
point supports (engineering, retail, etc.). This name will appear in
the WIPS server when one of the radios is configured as a sensor
and the WIPS functionality connects to the WIPS server. The WIPS
module only accepts names with up to 20 characters, keep that if
intending to use this AP as a sensor.
System Location Enter the location of the access point. The System Location
parameter acts as a reminder of where the AP can be found. Use
the System Name field as a specific identifier of device location.
Use the System Name and System Location fields together to
optionally define the AP name by the radio coverage it supports and
specific physical location. For example, “second floor engineering”