Specifications

AP-7131 Access Point Product Reference Guide
2-14
8. Rotate the AP-7131 chassis 45 degrees clockwise.
9. Push the back of the AP-7131 chassis on to the bottom of the ceiling T-bar.
10. Rotate the AP-7131 chassis 45 degrees counter-clockwise. The clips click as they fasten to
the T-bar.
11. The AP-7131 is ready to configure. For information on an AP-7131 default configuration, see
Getting Started on page 3-1. For specific details on AP-7131 system configurations, see
System Configuration on page 4-1.
2.7.3 Above the Ceiling (Plenum) Installations
An AP-7131 above the ceiling installation requires placing the AP-7131 above a suspended ceiling
and installing the provided light pipe under the ceiling tile for viewing the rear panel status LEDs of
CAUTION Ensure the safety wire and cabling used in the T-Bar AP-7131
installation is securely fastened to the building structure in order to
provide a safe operating environment.
!