Specifications

AP-7131 Access Point Product Reference Guide8-160
AP7131>admin(system)>set
Description:
Sets access point system parameters.
Syntax:
admin(system)>set name phils
admin(system)>set loc engineering
admin(system)>set email [e-mail]
admin(system)>set cc us
For information on configuring System Settings using the applet (GUI), see Configuring System Settings on page 4-2. Refer to
Appendix A for information on the two-character country codes.
set name <name> Sets the access point system name to <name> (1 to 59 characters). The access
point does not allow intermediate space characters between characters within
the system name. For example, “AP7131 sales” must be changed to
“AP7131sales” to be a valid system name.
loc <loc> Sets the access point system location to <loc> (1 to 59 characters).
email <email> Sets the access point admin email address to <email> (1 to 59 characters).
cc <code> Sets the access point country code using two-letters <code>.
NOTE This name will appear in the WIPS server when one of the radios is configured as a sensor and the WIPS
functionality connects to the WIPS server. The WIPS module only accepts names with up to 20 characters,
keep that if intending to use this AP as a sensor.