Specifications

8-153
AP7131>admin(network.router)> set
Description:
Shows the access point route table.
Syntax:
For information on configuring the Router options available to the access point using the applet (GUI), see Configuring Router Settings
on page 5-73.
set auth Sets the RIP authentication type (none, simple or MD5).
dir Sets RIP direction (rx, tx or both)
id Sets MD5 authetication ID (1-256) for specific index (1-2).
key Sets MD5 authetication key (up to 16 characters) for specified inded (1-2).
passwd Sets the password (up to 16 characters) for simple authentication.
type Defines the RIP type (off, ripv1, ripv2, or ripv1v2).
dgw-iface Sets the default gateway interface (lan1, lan2, wan or none).