Specifications

AP-7131 Access Point Product Reference Guide8-84
mu-retry <count> Sets the EAP maximum number of MU retries to
<count> (1-10).
svr-timeout <time> Sets the server timeout <time> in seconds (1-
255).
svr-retry <count> Sets the maximum number of server retries to
<count> (1-255).
Note: The WEP authentication mechanism saves
up to four different keys (one for each WLAN). It
is not requirement to set all keys, but you must
associate a WLAN with the same keys.
enc <idx> <type> Sets the encryption type to <type> (one of none,
wep40, wep104, keyguard, tkip, or ccmp) for
WLAN <idx>.
wep-
keyguard
passkey <passkey> The passkey used as a text abbreviation for the
entire key length (4-32).
index <key index> Selects the WEP/KeyGuard key (from one of the
four potential values of <key index> (1-4).
hex-key <kidx> <key string> Sets the WEP/KeyGuard key for key index <kidx>
(1-4) for WLAN <kidx> to <key string>.
ascii-key <kidx> <key string> Sets the WEP/KeyGuard key for key index <kidx>
(1-4) for WLAN <kidx> to <key string>.
mixed-mode <mode> Enables or disables interoperation with WEP128
clients.
Note: TKIP parameters are only affected if "tkip"
is selected as the encryption type.
tkip rotate-mode <mode> Enables or disabled the broadcast key.
interval <time> Sets the broadcast key rotation interval to <time>
in seconds (300-604800).
allow-wpa2-
tkip
<mode> Enables or disables the interoperation with
wpa2-tkip clients.
preauth <mode> Enables or disables preauthentication (fast
roaming).