Specifications

AP-7131 Access Point Product Reference Guide8-68
AP7131>admin(network.wireless.wlan)> create
Description:
Defines the parameters of a new WLAN.
Syntax:
Example:
admin(network.wireless.wlan.create)>show wlan
ESS Identifier :
WLAN Name :
802.11n (5.0 GHz) Radio : available
802.11n (2.4 GHz) Radio : not available
Client Bridge Mesh Backhaul : not available
Hotspot : not available
Maximum MUs : 127
MU Idle Timeout : 30
Security Policy : Default
MU Access Control :
Kerberos User Name : Default
Kerberos Password : ********
disallow MU to MU : disable
Use Secure Beacon : disable
create
show wlan <number> Displays newly created WLAN and policy number.
set ess <essid> Defines the ESSID for a target WLAN.
wlan-name
<name> Determines the name of this particlular WLAN (1-32).
5.0GHz <mode> Enables or disables access to the access point 5.0 GHz radio.
2.4Ghz <mode> Enables or disables access to the access point 2.4 GHz radio.
mesh <mode> Enables or disables the Client Bridge Mesh Backhaul option.
hotspot <mode> Enables or disables the Hotspot mode.
max-mu <number> Defines the maximum number of MU able to operate within the WLAN
(default = 127 MUs).
mu idle
timeout
<minutes> Sets the interval the access point uses to timeout idle MUs from WLAN
inclusion. Set between 1 -65532 minutes. Default is 30 minutes.
security <name> Sets the security policy to the WLAN (1-32).
acl <name> Sets the MU ACL policy to the WLAN (1-32).
passwd <ascii string> Defines a Kerberos password used if the WLAN’s security policy uses a
Kerberos server-based authentication scheme.
no-mu-mu <mode> Enables or disables MUs associated to the same WLAN to not
communicate with each other.
sbeacon <mode> Enables or disables the AP from transmitting the ESSID in the beacon.
bcast <mode> Enables or disables the access point from accepting broadcast IDs from
MUs. Broadcast IDs are transmitted without security.
qos <name> The index name representing the QoS policy used with this WLAN.
add-wlan Apply the changes to the modified WLAN and exit.