Specifications

AP-7131 Access Point Product Reference Guide
7-10
2. Refer to the Spanning Tree Info field to for details on spanning tree state, and root access
point designation.
Spanning Tree State Displays whether the spanning tree state is currently enabled or
disabled. The spanning tree state must be enabled for a unique
spanning-tree calculation to occur when the bridge is powered up
or when a topology change is detected.
Designated Root Displays the access point MAC address of the bridge defined as the
root bridge in the Bridge STP Configuration screen. For information
on defining an access point as a root bridge, see Setting the LAN
Configuration for Mesh Networking Support on page 9-6.
Bridge ID The Bridge ID identifies the priority and ID of the bridge sending the
message
Root Port Number Identifies the root bridge by listing its 2-byte priority followed by its
6-byte ID.