Specifications

Configuring Access Point Security
6-55
2. Configure the Detection Method field to set the detection method (MU or access point)
and define the 802.11a/n or 802.11b/g/n radio to conduct the rogue AP search.
CAUTION Users cannot define a rogue detection method when one of the access
point radios is functioning as a WIPS sensor. To use one of the radios
as a detector, you must disable WIPS sensor mode first, then set a
radio for the desired detection method. For information on disabling
WIPS sensor support for an access point radio, see
Configuring WIPS Server Settings on page 5-70.
!