Specifications

Configuring Access Point Security
6-37
Interface name Use the drop-down menu to specify the LAN1, LAN2 or WAN
connection used for routing VPN traffic. Remember, only one LAN
connection can be active on the access point Ethernet port at a
time. The LAN connection specified from the LAN screen to receive
priority for Ethernet port connectivity may be the better subnet to
select for VPN traffic.
Local WAN IP Enter the WAN’s numerical (non-DNS) IP address in order for the
tunnel to pass traffic to a remote network.
Remote Subnet Specify the numerical (non-DNS) IP address for the Remote Subnet.
Remote Subnet Mask Enter the subnet mask for the tunnel’s remote network for the
tunnel. The remote subnet mask is the subnet setting for the
remote network the tunnel connects to.
Remote Gateway Enter a numerical (non-DNS) remote gateway IP address for the
tunnel. The remote gateway IP address is the gateway address on
the remote network the VPN tunnel connects to.
Default Gateway Displays the WAN interface's default gateway IP address.
Manual Key Exchange Selecting Manual Key Exchange requires you to manually enter
keys for AH and/or ESP encryption and authentication. Click the
Manual Key Settings button to configure the settings.
Manual Key Settings Select Manual Key Exchange and click the Manual Key
Settings button to open a screen where AH authentication and
ESP encryption/authentication can be configured and keys entered.
For more information, see Configuring Manual Key Settings on
page 6-39.
Auto (IKE) Key
Exchange
Select the Auto (IKE) Key Exchange checkbox to configure AH and/
or ESP without having to manually enter keys. The keys
automatically generate and rotate for the authentication and
encryption type selected.
Auto Key Settings Select the Auto (IKE) Key Exchange checkbox, and click the Auto
Key Settings button to open a screen where AH authentication
and ESP encryption/authentication can be configured. For more
information, see Configuring Auto Key Settings on page 6-43.