Specifications

AP-7131 Access Point Product Reference Guide
6-26
in order to reduce processor overhead. Use the WLAN Security screens (WEP, Kerberos etc.) as
required for setting user authentication and data encryption parameters.
To configure the access point firewall settings:
1. Select Network Configuration -> Firewall
from the access point menu tree.
2. Refer to the Global Firewall Disable field to enable or disable the access point firewall.
3. Refer to the
Timeout Configuration field to define a timeout interval to terminate IP address
translations.
Disable Firewall Select the Disable Firewall checkbox to disable all firewall
functions on the access point. This includes firewall filters, NAT, VP,
content filtering, and subnet access. Disabling the access point
firewall makes the access point vulnerable to data attacks and is
not recommended during normal operation if using the WAN port.