Manualshelf

Specifications

ManualsBrandsMotorola ManualsNetworkingAP-7131 - Wireless Access Point
241242243244245246247248249250
Configuring Access Point Security
6-25
8. Configure the Fast Roaming (802.1x only) field as required to enable additional access
point roaming and key caching options. This feature is applicable only when using 802.1x
EAP authentication with WPA2/CCMP.
9. Click the Apply button to save any changes made within this New Security Policy screen.
10. Click the Cancel button to undo any changes made within the WPA2/CCMP Settings field
and return to the WLAN screen. This reverts all settings to the last saved configuration.
6.10 Configuring Firewall Settings
The access point's firewall is a set of related programs located in the gateway on the WAN side of
the access point. The firewall uses a collection of filters to screen information packets for known
types of system attacks. Some of the access point's filters are continuously enabled, others are
configurable.
Use the access point’s Firewall screen to enable or disable the configurable firewall filters. Enable
each filter for maximum security. Disable a filter if the corresponding attack does not seem a threat
Allow
WPA/WPA2-TKIP
clients
WPA2-CCMP Mixed Mode enables WPA2-CCMP, WPA-TKIP and
WPA2-TKIP clients to operate together on the network. Enabling
this option allows backwards compatibility for clients that support
WPA-TKIP and WPA2-TKIP but do not support WPA2-CCMP.
Motorola recommends enabling this feature if WPA-TKIP or
WPA2-TKIP supported MUs operate within a WLAN populated by
WPA2-CCMP enabled clients.
Pre-Authentication Selecting this option enables an associated MU to carry out an
802.1x authentication with another access point before it roams to
it. The access point caches the keying information of the client until
it roams to the other access point. This enables the roaming client
to start sending and receiving data sooner by not having to do
802.1x authentication after it roams. This feature is only supported
when 802.1x EAP authentication is enabled.
NOTE PMK key caching is enabled internally by default when 802.1x EAP
authentication is enabled.