Specifications

Configuring Access Point Security
6-7
6. Click Apply to keep changes made within the New Security Policy screen (if any).
Configure encryption or authentication supported security policies by referring to the
following:
access point authentication:
• To create a security policy supporting Kerberos, see, Configuring Kerberos
Authentication on page 6-8.
• To define a security policy supporting 802.1x EAP, see Configuring 802.1x EAP
Authentication on page 6-11.
access point encryption:
• To create a security policy supporting WEP, see Configuring WEP Encryption on page 6-
16.
• To define a security policy supporting KeyGuard, see, Configuring KeyGuard Encryption
on page 6-18.
• To configure a security policy supporting WPA/TKIP, see Configuring WPA/WPA2 Using
TKIP on page 6-20.
• To create a security policy supporting WPA2/CCMP, see Configuring WPA2-CCMP
(802.11i) on page 6-23.
WEP 128 (104-bit key) Select the WEP 128 (104 bit key) button to display the WEP 128
Settings field within the New Security Policy screen. For specific
information on configuring WEP 128, see Configuring WEP
Encryption on page 6-16.
KeyGuard Select the KeyGuard button to display the KeyGuard Settings
field within the New Security Policy screen. For specific
information on configuring KeyGuard, see Configuring KeyGuard
Encryption on page 6-18.
WPA/WPA2 TKIP Select the WPA/WPA2 TKIP button to display the WPA/TKIP
Settings field within the New Security Policy screen. For specific
information on configuring WPA/WPA2 TKIP, see Configuring
WPA/WPA2 Using TKIP on page 6-20.
WPA2/CCMP
(802.11i)
Select the WPA2/CCMP (802.11) button to display the WPA2/
CCMP Settings field within the New Security Policy screen. For
detailed information on configuring WPA2/CCMP, see Configuring
WPA2-CCMP (802.11i) on page 6-23.