Specifications

AP-7131 Access Point Product Reference Guide
5-72
The Wireless Intrusion Prevention System screen displays.
2. Within the WIPS Status field, define whether the 802.11a/n or 802.11b/g/n radio is
servicing its coverage area as a typical access point or as a WIPS sensor.
Selecting the WLAN checkbox defines the radio as a typical access point. Selecting the
WIPS checkbox defines the radio as a WIPS sensor.
3. Define a primary and alternate WIPS server IP Address within the WIPS Server 1 and
WIPS Server 2 fields.
This is the address of the WIPS console server.
NOTE At least one radio is required to be set to WIPS (within the Wireless
Intrusion Prevention System screen) to support WIPS on the AP-7131. If
using the access point’s CLI interface to define WIPS support, go to the
network > wireless > radio context and issue a
set rf-function <radio idx> wips command.