Specifications

Network Management
5-71
The following is a network topology illustrating how WIPS functions within an AP-7131 supported
wireless network:
To define the attributes of the WIPS server:
1. Select Network Configuration -> Wireless -> WIPS from the access point menu tree.
CAUTION Users cannot define a radio as a WIPS sensor when one of the access
point radios is functioning as a rogue AP detector. To use one of the
radios as a WIPS sensor, you must disable its current detector
method(s) first, then set the radio for WIPS sensor support. For
information on disabling rogue AP detection, see Configuring Rogue
AP Detection on page 6-54.
!