Specifications

Network Management
5-69
2. Select either the Radio 1(802.11b/g/n) or Radio 2(802.11a/n) tab to display the WLANs
enabled for the selected radio and their existing configurations.
The WLANs displaying for the selected radio were assigned when the WLAN was created
or modified. A single WLAN can be assigned to either radio, and if necessary have different
bandwidth management configurations. To modify a WLAN-to-radio assignment, see
Creating/Editing Individual WLANs on page 5-31.
3. Use the Bandwidth Share Mode drop-down menu to define the order enabled WLANs
receive access point services. Select one of the following three options:
4. Configure the Bandwidth Share for Each WLAN field to set a raw weight (for WLANs
using the Weighted Round-Robin option) for each WLAN. The weight% changes as the
weight is entered.
If a WLAN has not been enabled from the Wireless screen, it is not configurable using the
Bandwidth Management screen. To enable a specific WLAN, see Enabling Wireless
LANs (WLANs) on page 5-28.
First In First Out WLANs receive services from the access point on a first-come,
first-served basis. This is the default setting.
Round-Robin Each WLAN receives
access point services in turn as long the
access point has data traffic to forward.
Weighted Round-
Robin
If selected, a weighting (prioritization) scheme (configured within
the QoS Configuration screen) is used to define which WLANs
receive
access point resources first.
WLAN Name Displays the name of the WLAN. This field is read-only. To change
the name of the WLAN, see Creating/Editing Individual WLANs on
page 5-31.
Weight This column is not available unless Weighted Round-Robin is
selected. Assign a weight to each WLAN. This percentage equals
the
access point bandwidth share for that WLAN when network
traffic is detected.
Weight (%) This column is automatically updated with the appropriate WLAN
bandwidth share when the Weight is modified.