Specifications

AP-7131 Access Point Product Reference Guide
5-54
2. Enable the radio(s) using the Enable checkbox(es).
Review the Radio Function to assess if this radio is currently functioning as a WLAN radio
or has been dedicated as a WIPS sensor.
Refer to RF Band of Operation parameter to ensure you are enabling the correct
802.11a/n or 802.11b/g/n radio. After the settings are applied within this Radio
Configuration screen, the Radio Status and MUs connected values update. If this is an
existing radio within a mesh network, these values update in real-time.
3. Select the Base Bridge checkbox to allow the radio to accept client bridge connections
from other access points in client bridge mode. The base bridge is the acceptor of mesh
network data from those client bridges within the mesh network and never the initiator.
CAUTION If a radio is disabled, be careful not to accidentally configure a new
WLAN, expecting the radio to be operating when you have forgotten it
was disabled.
!