Specifications

Network Management
5-23
2. Configure the Address Mappings field to generate a WAN IP address, define the NAT type
and set outbound/inbound NAT mappings.
WAN IP Address The WAN IP addresses on the NAT screen are dynamically
generated from address settings applied on the WAN screen.
NAT Type Specify the NAT Type as 1 to 1 to map a WAN IP address to a single
host (local) IP address. 1 to 1 mapping is useful when users need
dedicated addresses, and for public-facing servers connected to
the access point.
Set the NAT Type as 1 to Many to map a WAN IP address to
multiple local IP addresses. This displays the
mappings button in
the adjacent Outbound Mappings field. This button displays a
screen for mapping the LAN IP addresses that are associated with
each subnet.
Define the NAT Type as none when routable IP addresses are used
on the internal network.