Specifications

System Configuration
4-39
7. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the
settings displayed on SNMP Traps screen to the last saved configuration.
8. Click Logout to securely exit the access point Access Point applet. A prompt displays
confirming the logout before the applet is closed.
4.6.4 Configuring SNMP RF Trap Thresholds
Use the SNMP RF Trap Threshold screen as a means to track RF activity and the access point’s
radio and associated MU performance. SNMP RF Traps are sent when RF traffic exceeds defined
limits set in the RF Trap Thresholds field of the SNMP RF Traps screen. Thresholds are displayed
for the access point, WLAN, selected radio and the associated MU.
To configure specific SNMP RF Traps on the access point:
1. Select System Configuration - > SNMP Access - > SNMP RF Trap Thresholds from
the menu tree.
2. Configure the RF Trap Thresholds field to define device threshold values for SNMP traps.