Installation guide
Defining a Basic AP-6511 Configuration
21
• Configure VLANs Manually - Select the checkbox to enable an advanced manual VLAN
configuration.
• Advanced VLAN Configuration - Select the Advanced VLAN Configuration button to set
associations between VLANs and physical interfaces. Selecting this option displays a
screen for editing the tagging, trunking and VLAN assignments for each AP-6511 port.
16. Set the following DHCP Address Assignment information:
• Use the Controller to assign IP addresses to devices -Select the checkbox to enable the
onboard DHCP server to provide IP and DNS information to clients on the LAN interface.
• IP Address Range - Enter a starting and ending IP Address range for client assignments
on the LAN interface. Avoid assigning IP addresses from x.x.x.1 - x.x.x.10 and x.x.x.255
as they are often reserved for standard network services.
17. Set the following Domain Name Server information:
• Primary DNS - Enter an IP Address for the main Domain Name Server providing DNS
services for the LAN interface.
• Secondary DNS - Enter an IP Address for the backup Domain Name Server providing DNS
services for the LAN interface.
18. Select Next to continue to the WAN Configuration screen.
The WAN Configuration screen is partitioned into WAN Interface and Gateway fields.