User manual

SM User Manual January 2004
Software Release 4.1
Reboot
When the operator clicks this button, the module reboots. When the operator has changed
parameters in the IP Configuration page, the system highlights the Reboot button as a reminder
that a reboot (in addition to a save operation) is required to implement the changes.
8.3.3 IP Configuration Parameters with NAT Enabled
When NAT (network address translation) is enabled, the IP Configuration page provides the
following parameters:
Figure 40: IP Configuration screen, NAT with DHCP client and DHCP server
Issue 5 Page 94 of 119