User manual

SM User Manual January 2004
Software Release 4.1
8.3 IP CONFIGURATION PAGE
An example of an IP Configuration screen is displayed in
• Figure 38 on Page 92 for the NAT Disabled implementation with public accessibility.
• Figure 39 on Page 93 for the NAT Disabled implementation with local accessibility.
• Figure 40 on Page 94 for the NAT with DHCP Client and DHCP Server
implementation.
• Figure 41 on Page 95 for the NAT with DHCP Client implementation.
• Figure 42 on Page 96 for the NAT with DHCP Server implementation.
• Figure 43 on Page 97 for the NAT without DHCP implementation.
The set of parameters that the IP Configuration page provides depends on whether network
address translation is enabled.
8.3.1 IP Configuration Parameters with NAT Disabled
When NAT (network address translation) is disabled on the NAT Configuration page as shown in
Figure 44 on Page 99, the IP Configuration page provides the following parameters:
Figure 38: IP Configuration screen, NAT disabled, public accessibility
Issue 5 Page 92 of 119