User manual

SM User Manual January 2004
Software Release 4.1
Figure 34: Status screen for 2.4-GHz SM
The Status page provides information on the operation of this SM. This is the default web page for
the SM.
8.1.1 Status Parameters
The Status page provides the following parameters:
Device Type
This field indicates the type of the Canopy module. Values include the frequency band of the
module, the protocol that is used, and the MAC address of the module.
Canopy Boot Version
This field indicates the version of the software that is operated on the module, the date and time of
boot, and whether the module is secured by DES or AES encryption (see Security Features on
Page 21). When requesting technical support, provide the information from this field.
FPGA Version
This field indicates the version of the field-programmable gate array (FPGA) on the module. When
requesting technical support, provide the information from this field.
Uptime
This field indicates how long the module has operated since power was applied.
System Time
This field provides the current time. Any SM that registers to an AP inherits the system time, which
is displayed in this field as GMT (Greenwich Mean Time).
Issue 5 Page 83 of 119