User manual

SM User Manual January 2004
Software Release 4.1
8 SM INTERFACE PAGES
The Canopy SM interface provides a series of web pages to configure and monitor the unit. The
following is a quick reference to the interface screens.
NOTE: These screens are subject to change by subsequent software versions.
Access to the web-based interface is available only through a computer that is directly connected
or connected through a network to the SM. If the computer is not connected to a network when the
module is configured on a bench, then disabling of the proxy setting in the computer may be
required. In the address bar of the browser, the operator enters the IP address of the SM (default
is 169.254.1.1).
The interface of the SM provides access to the following pages:
Status
Configuration
IP Configuration
NAT
Configuration
Event Log
AP Eval Data
Ethernet Stats
Expanded Stats
These pages resemble those of the BH timing slave, but differ and are unique to the SM.
Issue 5 Page 81 of 119