User manual

SM User Manual January 2004
Software Release 4.1
5.6.6 5.7-GHz Channels
Channel selections for the AP in the 5.7-GHz band depend on whether the AP is deployed in
cluster. Channel selections for the BH are not similarly limited.
5.7-GHz BH and Single AP Available U-NII Channels
A BH or a single 5.7-GHz AP can operate in the following U-NII channels, which are separated by
5-MHz.
(All Frequencies in GHz)
5.745 5.765 5.785 5.805
5.750 5.770 5.790
5.755 5.775 5.795
5.760 5.780 5.800
The channels of adjacent APs should be separated by at least 20 MHz. However, Canopy advises
25-MHz separation.
5.7-GHz AP Cluster Recommended U-NII Channels
Four non-overlapping U-NII channels are recommended for use in a 5.7-GHz AP cluster:
(All Frequencies in GHz)
5.745 5.765 5.785 5.805
The fully populated cluster requires only three channels, each reused by the module that is
mounted 180° opposed. The four channels above are also used for backhaul point-to-point links.
5.7-GHz BH and Single AP Available ISM/U-NII Channels
A BH or a single 5.7-GHz AP enabled for ISM/U-NII frequencies can operate in the following
channels, which are separated by 5-MHz increments.
(All Frequencies in GHz)
5.735 5.765 5.795 5.825
5.740 5.770 5.800 5.830
5.745 5.775 5.805 5.835
5.750 5.780 5.810 5.840
5.755 5.785 5.815
5.760 5.790 5.820
Issue 5 Page 62 of 119